Land:Währung:
Preiseinkl. | exkl. | exkl. & inkl. MwSt.

Great experience!

Wide selection, quality products, real time inventory status, and fast shipping (From UK to Canada in 3 days!). A great company... (21st August 2017 via Trustpilot)
AFG120B, vibrationshemmende 120 mm Lüfterdichtung
6077 auf Lager
€9,49
(19 customer ratings / 4 reviews)
AFG92B, vibrationshemmende 92 mm Lüfterdichtung
781 auf Lager
€8,32
(3 customer ratings)
AFG80B, vibrationshemmende 80 mm Lüfterdichtung
1328 auf Lager
€7,71
(14 customer ratings / 1 review)
AFG60B, vibrationshemmende 60 mm Lüfterdichtung
925 auf Lager
€4,50
(11 customer ratings)

AcoustiFan Anti-vibration Soft Silicone Fan Gaskets

These ultra-soft fan gaskets are designed to reduce the vibration from PC and server case cooling fans, and maintain a seal between the case side and the fan housing. Each retail pack contains an anti-vibration fan gasket with 4 silicone washers and mount

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis.

Funktionen

  1. Hilft bei der Dämmung der Lüftervibration
  2. Zur Abdichtung der schmalen Lücke zwischen Lüfter und Gehäusewand
  3. Kompatibel mit nahezu allen Gehäusekühlern
  4. Geliefert mit Schrauben und Silikon-Unterlegscheiben
  5. Schnell und einfach anzubringen

These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks!

Fitting instructions

  1. Fit the fan gasket onto the outside of the fan housing (it will stay on the fan)
  2. Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side
  3. Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw
  4. Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.

Animation showing a vibration-reducing silicone fan gasket fitted to a standard case cooling fan, and fastened into position with a screw and external silicone washer.
Animation showing a vibration-reducing silicone fan gasket fitted to a standard case cooling fan, and fastened into position with a screw and external silicone washer.

Technische DatenAFG120BAFG92BAFG80BAFG60B
Gasket Thickness2.5mm 1.5mm
Operating Temperature-20 to +70°C
SoftnessShore A 25 ± 5
MaterialBlack Silicone Rubber
Recommended Compression5% of height
Garantie24 Monate
EAN Barcode5060087740218 5060087740201 5060087740195 5060087740270

Kundenbewertungen

AFG120B
AFG92B
AFG80B
AFG60B

Vibes

,

This item doesn't do anything very complex in life, but it was easy to install and probably helps calm the case's tendency to rattle. So, worth buying.

Very easy to install

,

Much easier to install than those rubber golf tee mounts. I recommend these are always used with fans to avoid case vibrations. They are a cheap add on and worthwhile as far as I can tell.

Fiddly

,

Ich habe alle meine neuen Lüfter damit eingebaut. Der Einbau ist etwas knifflig und sie sind dünner, als sie aussehen. Doch einmal eingebaut, funktionieren sie gut. Zusätzlich habe ich anstelle der Metallschrauben Silikonhalter verwendet, die ihre Aufgabe ebenfalls gut erfüllen.

stop the judder

,

These work - they reduce the vibration on the fan through the chassis.

We haven't received any reviews of this product yet.

Does the job well.

,

Works well. You may need to make the holes in the case slightly bigger - don't forget the screws shouldn't touch the sides of the holes. And don't overtighten!

We haven't received any reviews of this product yet.

 

Our Address

Quiet PC Ltd
Brawby Grange
Brawby
Malton
YO17 6PZ
United Kingdom

Our Numbers

Useful Information

Keep In Touch

MasterCardMaestroPayPalAmerican ExpressVisaVisa Electron
30-tägige Geld-zurück-Garantie
2 Jahre Gewährleistung

© 2000-2017 Quiet PC Ltd. If you have seen an error on this page, please let us know.