Project S Silver Hybrid ATX Chassis Discontinued | |
| More variations available Show | |
Nanoxia Project S Silver Hybrid ATX Chassis
The Project S was developed for Computex 2016. It is Nanoxia’s first full-fledged HTPC / Tower case - with a special twist.
Features
- Sophisticated draw design
- Can be used as an HTPC or Tower chassis
- Can accommodates high end components
- Tempered glass side/top panel
- Lots of cooling/watercooling options
Nanoxia’s Project S high-end HTPC case provides sufficient space for ATX motherboards and standard ATX power supplies. The case can accommodate two 3.5” HDDs and three 2.5” SSDs. The 3.5” drives are installed in a special HDD holder, which can be removed to create space for a watercooling radiator or additional fans.
Project S in the tower position
Equipped with many practical features, such as fully modular HDD brackets, magnetic dust filters, a top made of scratch-resistant tempered glass and the opportunity to install a watercooling radiator. There is also another unique feature of the Project S - it can be used in upright position as a midi tower. By using highest quality materials it also ensures maximum stability for the Project S.
Sophisticated draw design
The absolute highlight of the Project S is certainly the sophisticated drawer design. The drawer can be easily pulled out for installation or maintenance of the system – even if the hardware is fully installed and the PC is switched on. The top is made out of tempered glass, which still allows an unobstructed view on the installed hardware. Since the tempered glass is scratch-resistant, a monitor can be placed on the top if desired.
Front panel design
The I/O-Panel can be found in the right corner of the front panel, which includes 2x 3.0 USB and 1x 3.1 Type C USB, as well as the mandatory audio jacks. The power, reset buttons and the LED on/off switch are located above the USB-ports. The noble and intentionally simple front design is highlighted again by an RGB LED strip, which decorates the lower part of the front. The RGB LED has a separate controller to customise the color. It is also possible to disable the LED at any time.
Cooling options
A 120mm fan from the CoolForce fan series is preinstalled in the back. Eight case fans can be mounted in total: Behind the front, two 120 or 140mm fans can be installed. In addition, there are mounting spaces for three 120mm fans on the right side and two 120mm fans on the left side at the expense of the HDD holder. To prohibit dust from entering the interior there are magnetic dust filters on both sides.
Watercooling options and compatibility
The Project S can be efficiently equipped with radiators or compact watercooling solutions. Not only behind the front panel, but also on both sides. A 240 or 280mm radiator or compact water cooling solution can be mounted behind the front. The right side panel takes in turn a 120 or 240mm radiator, and the left side allows the installation of a 120mm radiator. Finally the Project S can accommodate graphic cards with a length of up to 400mm and space for CPU coolers with a maximum height of 170mm.
More images
| Specifications | Project S Silver |
|---|---|
| Manufacturer Number | NXPSS |
| Case Type | HTPC / Tower |
| Form Factor | ATX, Micro-ATX, Mini-ITX |
| 2.5 inch drive bay internal | max. 5 |
| 3.5 inch drive bay internal | 2 * |
| Case Fan (Front) | Space for 2x 120/140 mm |
| Case Fan (Rear) | 1x 120 mm (supplied) |
| Case Fan (Left side) | Space for 2x 120 mm * |
| Case Fan (Right side) | Space for 3x 120 mm |
| Height (Approx.) | 250 mm |
| Width (Approx.) | 490 mm |
| Depth (Approx.) | 460 mm |
| Material | Steel, aluminium, tempered glass |
| Weight (Approx.) | 11.7 kg |
| Maximum installation height of CPU coolers | 170 mm |
| Maximum VGA Card Length | 400 mm |
| Warranty | 24 months |
| EAN barcode | 4260285294167 |
- *Either 2x 120mm case fans, 2x 3.5” HDDs or watercooling radiator can be installed on the left of the case.
| Specifications | Project S Silver |
|---|---|
| Manufacturer Number | NXPSS |
| Case Type | HTPC / Tower |
| Form Factor | ATX, Micro-ATX, Mini-ITX |
| 2.5 inch drive bay internal | max. 5 |
| 3.5 inch drive bay internal | 2 * |
| Case Fan (Front) | Space for 2x 120/140 mm |
| Case Fan (Rear) | 1x 120 mm (supplied) |
| Case Fan (Left side) | Space for 2x 120 mm * |
| Case Fan (Right side) | Space for 3x 120 mm |
| Height (Approx.) | 250 mm |
| Width (Approx.) | 490 mm |
| Depth (Approx.) | 460 mm |
| Material | Steel, aluminium, tempered glass |
| Weight (Approx.) | 11.7 kg |
| Maximum installation height of CPU coolers | 170 mm |
| Maximum VGA Card Length | 400 mm |
| Warranty | 24 months |
| EAN barcode | 4260285294167 |
- *Either 2x 120mm case fans, 2x 3.5” HDDs or watercooling radiator can be installed on the left of the case.
See Also
Product Resources
Top Quiet PC Cases
Streacom ST-BC1 V2 Black Aluminium ATX Open Benchtable
Streacom ST-BC1 V2 Silver Aluminium ATX Open Benchtable
Antec P5-SILENT, Quiet Mid-Tower Micro-ATX PC Chassis
Streacom FC8WS ALPHA Silver Fanless Aluminium ITX Chassis, no optical
Streacom DA2 V2 Silver Full Aluminium Compact ITX Chassis
Streacom FC8WS ALPHA Titanium Fanless Aluminium ITX Chassis, no optical
Fractal Design Define 7 Mid Tower Black PC Case
Cooler Master Masterbox Q300L Micro-ATX PC Chassis
ASUS TUF Gaming GT502 Black Chassis
Antec DP301M Dark Phantom m-ATX Gaming Case with Window
